We’ve come up with a replacement for the very fragile stock Foxbody plastic radio surround!
-Engineered and manufactured in house in the USA!
-CNC laser cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish
-Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build
-Uses all factory mounting locations so there is no drilling, cutting, or modifying your car
-All necessary mounting hardware and installation instructions are included
If you have any questions please contact us!
-If you need a custom configuration that can’t be made from the above options, just write to us and we’d be happy to work with you on one that will meet your needs!
-Our radio surround will currently only fit ’90-’93 Foxbodys. We are hoping expand into other year ranges soon!
Single and Double DIN Radio Notes:
-You may need to slightly trim your dashboard (1/16″ or so total) to allow it to fit while clearing the radio mount bracket. We did not need to on our donor car, but it was very tight so if there is any variation in manufacturing tolerances from Ford (very likely) you may run into slight interference.
-As stated above, the radio is a tight fit and has a mount bracket riveted on. You will need to mark where the holes land on it by test fitting your radio into the surround/bracket, marking the hole centers, and drilling them. We do not provide any holes to fasten the radio/head unit to the aluminum bezel as there are so many various aftermarket options. All other holes needed to mount the radio bezel to the vehicle are present and utilize stock mounting holes in the dashboard.
-Dimensions for the Double DIN opening are listed in the pictures. Please confirm that your stereo will fit prior to ordering.
*All products are made to order in house by Landon and Rebecca, so we currently have a 15 business day (3 week) build time. Thanks for understanding!*