FB Rear Seat/Storage Bin Delete

We’re happy to release our Rear Seat/Storage Bin Delete for the ’84-’85 1st Generation RX-7!

-Engineered and manufactured in house in the USA!

-CNC cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish

-Saves approximately 11 lbs vs the stock storage bins

-Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build

-Uses all factory mounting locations so there is no drilling, cutting, or modifying your car (**unless you order the battery relocation add on**)

-All necessary mounting hardware and installation instructions are included

 

 

Seat Delete Notes:

The rear seat/storage bin delete includes panels that will fill the gap between our seat delete and our quarter trim panels (or gutted quarters), giving it a more complete look!

-If your interior is gutted (no carpet) you may want to consider purchasing the add on foam tape option to quiet it down!

-The seat delete includes: 2 front filler panels, the main bottom seat delete portion, the upper divider panel (which separates the seat area from the hatch), and 2 wheel hump covers. If you purchase either the add on “RX-7” badge or covers (either raised or flat) they will also be included. The LRB Speed Quarter Trim and Upper B-Pillar Trim panels are not included with this item. If you would like to purchase the whole kit including these pieces, it is available here: **

Rear Seat/Storage Bin Delete Options: If your battery has been relocated to the storage bin area we have a few options to accommodate it with our kit!

-Flat Covers – Sit flush with the seat delete for a sleek look while still allowing access to a small battery or hidden storage! Toolless hardware (winged screws) will be included, so you can easily access it anywhere! The maximum battery size that will fit with a flat cover is 6.5″ height x 9″ length x 7″ width. (See battery sketch for details)

-Raised Battery Covers – These are designed to fit the stock battery size (Group 35). Toolless hardware (winged screws) will be included, so you can easily access it anywhere! The maximum battery size that will fit with a raised battery cover is 9″ height x 9″ length x 7″ width.

Battery Mounting Kit Notes:

-Kit includes battery base plate which nests perfectly into the bottom of the rear seat bucket, 2 threaded rods with wing nuts, and a top clamping plate. The holes in the base plate are slotted so they can accommodate varying battery sizes.

-Mounting kit installs using M6 rivet nuts (Rivnuts) which are included, but you will need your own rivnut tool.

 

 

*For track or offroad use ONLY! Do not allow any passengers to be in this area while the vehicle is moving. We cannot be held liable for any damage, injury, etc. from improper usage.*

*All products are made to order in house by Landon and Rebecca, so we currently have a 15 business day (3 week) build time. Thanks for understanding! 🙂 *