We’re happy to release our rear interior kit for the 1st Generation RX-7! Our kit includes the Rear Seat/Storage Bin Delete, Quarter Trim Panels, and Upper Interior B-Pillar Trim Panels all for a discounted price!
-Engineered and manufactured in house in the USA
-All mounting hardware is included
-CNC laser cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish
-Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build
-Mounts to all stock holes so there is no drilling or modification to your car needed for installation!
-Included with our Rear Interior Kit:
–Quarter Trim Panels and Upper Interior B-Pillar Trim Panels
**The Rear Bulkhead, Rear Quarter Trim Panels, and Spare Tire Cover are NOT included.**
Seat Delete Notes:
-If your interior is gutted (no carpet) you may want to consider purchasing the add on foam tape option to quiet it down!
Seat Delete Options: If your battery has been relocated to the storage bin area we have a few options to accommodate it with our kit!
-Flat Covers – Sit flush with the seat delete for a sleek look while still allowing access to a small battery or hidden storage! Toolless hardware (winged screws) will be included, so you can easily access it anywhere! The maximum battery size that will fit with a flat cover is 6.5″ height x 9″ length x 7″ width. (See battery sketch for details)
-Raised Battery Covers – These are designed to fit the stock battery size (Group 35). Toolless hardware (winged screws) will be included, so you can easily access it anywhere! The maximum battery size that will fit with a raised battery cover is 9″ height x 9″ length x 7″ width.
Rear Quarter Trim Notes:
These replace the stock quarter trim pieces to finish off the rear interior of your car with aluminum panels! Variations are available for use with the stock seatbelts or without them if you are running aftermarket harnesses.
-Quarter Trim and Upper Interior B-Pillar Trim Seatbelt Options: If you select “For Use With Aftermarket Harnesses” the stock seatbelt mounting points will be covered by our panels.
Battery Mounting Kit Notes:
-Kit includes battery base plate which nests perfectly into the bottom of the rear seat bucket, 2 threaded rods with wing nuts, and a top clamping plate. The holes in the base plate are slotted so they can accommodate varying battery sizes. It was designed around the stock size battery (Group 35). The maximum battery size that will fit with the raised cover is 9″ height x 9″ length x 7″ width. The maximum battery size that will fit with a flat cover is 6.5″ height x 9″ length x 7″ width. (See battery sketch for details)
-Mounting kit installs using M6 rivet nuts (Rivnuts) which are included. We also have an option that includes the rivet nut installation tool if you don’t already have one (view in pictures)!
*For track or offroad use ONLY! Do not allow any passengers to be in this area while the vehicle is moving. We cannot be held liable for any damage, injury, etc. from improper usage.*
*All products are made to order in house by Landon and Rebecca, so we currently have a 15 business day (3 week) build time. Thanks for understanding! 🙂 *