A customizable aluminum dashboard for the NB Miata (’98-’05) chassis!
-Engineered and manufactured in house in the USA!
-CNC cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish
-Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build
-Saves approximately 10 lbs vs. the stock dashboard
-Uses all factory mounting locations so there is no drilling, cutting, or modifying your car
-All necessary mounting hardware and installation instructions are included
-This dashboard is designed to work with only either our full aluminum door panels, stock door panels, or no door panels. Door panels from other companies might interfere with our dashboard.
If you have any questions please contact us! 🙂
-RHD NOTE: Our RHD Dash will mount to a LHD dash bar and will not currently work with a RHD dash bar. This does save time and money over sourcing a RHD dash bar if you are doing a conversion. If you have a RHD dash bar installed in your car please write to us prior to ordering and we can figure out how to make it work!
-Driver’s Gauges Customization Notes: Let us know which gauges/digital dashboard display (Racepak etc) you’d like (along with their dimensions and the approximate location that you’d like them) to go on the dashboard in front of the driver. Your custom setup must fit within the following dimensional area: 18″ wide x 5.5″ high. There is a notch in the center of this area for the steering column, so in the center the height is only 2.5″
-Center Console Customization Notes: Let us know which gauges/digital dashboard display (Racepak etc) you’d like (along with their dimensions and the approximate location that you’d like them) to go on the center console. Your custom setup must fit within the following dimensional area: 9″ wide x 12.5″ high
-Utilizing Stock Gauge Panel Notes: This option will fit the stock gauge panel, or our aluminum gauge panel. We cannot guarantee if it will fit with other aftermarket gauge clusters.
-All options include the hazard switch and window switches in the tombstone. You will have to relocate them in order to use our aluminum dashboard as their stock mounting position is removed. Some wiring for the window switch needs to be modified (trimming electrical tape insulation and peeling the window switch sub-harness away from the rest of the stock harness so it will reach the new position – NO ACTUAL RE-WIRING IS REQUIRED)
-Our dashboard kit ships unassembled and will need to be riveted together! All rivets are included and all holes are pre-drilled in the proper locations, so assembly is straightforward and there are thorough installation instructions. Assembly and installation will take approximately 2 hours.
-Due to the customizable nature of the dashboard, it is not eligible for return or exchange!
*All products are made to order in house by Landon and Rebecca, so we currently have a 15 business day (3 week) build time. Thanks for understanding! 🙂 *