FC Rear Interior Kit

We’re happy to release our rear interior kit for the 2nd Generation RX-7! Our kit includes the Rear Seat/Storage Bin Delete and Quarter Trim Panels all for a discounted price! -Engineered and manufactured in house in the USA -All mounting hardware is included -CNC laser cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish -Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build -Mounts to all stock holes so there is no drilling or modification to your car needed for installation!   Seat Delete Notes: The rear seat/storage bin delete includes panels that will fill the gap between our seat delete and our quarter trim panels, giving it a more complete look! -If your interior is gutted (no carpet) you may want to consider purchasing the add on foam tape option to quiet it down! -The seat delete includes: 2 front filler panels, the main bottom seat delete portion, the upper divider panel (which separates the seat area from the hatch), a rear raiser piece, and 2 wheel hump covers. If you purchase either the add on “RX-7” badge or covers (either raised or flat) they will also be included. Seat Delete Options: If your battery has been relocated to the storage bin area we have a few options to accommodate it with our kit! -Battery Mounting Location refers to where you’ll be relocating the battery. Our relocation kit can either be used in the seat bucket on the LH or RH of the vehicle (the mounting tray is side specific, so be sure to choose the correct side!!) -Kit includes battery base plate which nests perfectly into the bottom of the rear seat bucket, 2 threaded rods with wing nuts, and a top clamping plate. The holes in the base plate are slotted so they can accommodate varying battery sizes. It was designed around the stock size battery (Group 35). The kit uses rivnuts to install the tray to the vehicle which will require drilling and vehicle modification. The rivnuts are included, but we do not provide a rivnut tool. -Flat Covers – Sit flush with the seat delete for a sleek look while still allowing access to a small battery or hidden storage! Toolless hardware (winged screws) will be included, so you can easily access it anywhere! The maximum battery size that will fit with a flat cover is 6.72″ height x 9″ length x 7″ width. (See battery sketch for details) -Raised Battery Covers – These are designed to fit the stock battery size (Group 35). Toolless hardware (winged screws) will be included, so you can easily access it anywhere! The maximum battery size that will fit with a raised battery cover is 9.59″ height x 9″ length x 7″ width. Rear Quarter Trim Notes: These replace the stock quarter trim pieces to finish off the rear interior of your car with aluminum panels! Variations are available for use with the stock seatbelts or without them if you are running aftermarket harnesses. -Quarter Trim Seatbelt Options: If you select “For Use With Aftermarket Harnesses” the stock seatbelt mounting points will be covered by the quarter trim   -Note: The Rear Quarter Trim and Hatch Bulkhead Panels (seen in some pictures) are not included!    *For track or offroad use ONLY! Do not allow any passengers to be in this area while the vehicle is moving. We cannot be held liable for any damage, injury, etc. from improper usage.* *All products are made to order in house by Landon and Rebecca, so we currently have a 15 business day (3 week) build tim. Thanks for understanding!*