FD Battery Relocation Kit

We’re happy to release our battery relocation kit for the 3rd Generation RX-7! Our kit moves the battery from the stock location to mount it behind either the driver or passenger seat in the bin location!

-Engineered and manufactured in house in the USA

-All mounting hardware is included – including rivet nuts (rivnuts)

-CNC laser cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish

-Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build

Battery Mounting Kit Notes:

-Battery Mounting Location refers to where you’ll be relocating the battery. Our relocation kit can either be used in the seat bucket on the LH or RH of the vehicle (the mounting tray is side specific, so be sure to choose the correct side!!)

-Kit includes battery base plate which nests perfectly into the bottom of the rear seat bucket, 2 threaded rods with wing nuts, and a top clamping plate. The holes in the base plate are slotted so they can accommodate varying battery sizes. It was designed around the stock size battery (Group 35). The maximum battery size that will fit with the raised cover on our seat delete is 9″ height x 9″ length x 7″ width. The maximum battery size that will fit with a flat cover on our seat delete is 6.5″ height x 9″ length x 7″ width. (See battery sketch for details). Small batteries can sometimes fit under modified stock bins, but there will be quite a bit of trimming involved to make it fit.

-Mounting kit installs using M6 rivet nuts (Rivnuts) which are included, but you will need your own rivnut tool.

Note: Modification to your vehicle will be required to mount our kit! 

*For track or offroad use ONLY! We cannot be held liable for any damage, injury, etc. from improper usage.*

*All products are made to order in house by Landon and Rebecca, so we currently have a 15 business day (3 week) build time. Thanks for understanding! 🙂 *