SC300/SC400 Aluminum Door Panels

We’re now offering aluminum door panels for the SC300/SC400!

-Engineered and manufactured in house in the USA

-CNC laser cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish

-Sold as a pair

-Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build

-Interior space is gained by the panels sitting flat against the door (great for roll cages, racing seats, etc)

-Uses all factory mounting locations in the door so there is no drilling, cutting, or modifying your doors (minor disassembly of your stock panels is required)

-Mounting hardware, pull straps, and detailed installation instructions are included

If you have any questions please contact us!

Notes:

-Textured matte black powder coat samples can be seen in the pictures. They are for reference only and coating might vary slightly with different batches.

-Powder Coating will add approximately 3 weeks to our standard build time.

Speakers:

-4″ Factory Speaker Notes: These will fit the stock 4″ speakers without modification.

-6.5″ Speaker Notes: You’ll need to provide your own 6.5″ speakers (we chose to model around the 6.5″ speakers as this was the largest we could fit recessed in the door) and you’ll also need to re-do the wiring accordingly to accommodate the new speakers. If you are still using your factory head unit, the wiring may be a bit more involved to make everything work since you will not be utilizing the amp from the stock speaker housing.

Depending  on the speakers you use, you may need to drill holes to the sub-plate to mount the speakers to. We included 2 different hole patterns that should fit most speaker configurations, but we wanted to mention that it is a possibility as there are many different speaker manufacturers that may use different mounting locations.

If you need a different speaker hole size, please write to us or leave a note during checkout!

Switch Options:

-If you’d like any switch configurations other than the options listed in the drop down menu, just leave a note during checkout (underneath where you enter your billing/shipping information) letting us know which switches you’d like to retain and which you don’t need or Contact Us.

 

*All products are made to order in house by Landon and Rebecca, so we currently have a 15 business day (3 week) build time. Thanks for understanding! 🙂 *