1994-1997 Dodge Ram Aluminum Dashboard

A customizable aluminum dashboard for the 2nd Gen (’94-’97) Dodge Ram!

-Engineered and manufactured in house in the USA!

-CNC laser cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish

-Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build

-Weighs approximately 18 lbs and replaces the broken stock plastic dashboard

-Uses all factory mounting locations so there is no drilling, cutting, or modifying your truck

-All necessary mounting hardware and installation instructions are included

If you have any questions please contact us! 🙂

 

Notes: 

-If you need a dashboard for your 1998-2002 Ram, they can be purchased here: https://lrbspeed.com/product/98-02-dodge-ram-aluminum-dashboard/

-This dashboard is designed to work with stock door panels or our aluminum door panels. Aftermarket door panels from other companies may interfere with the dashboard design and may require modification to work.

-Driver’s Gauges Customization Notes: Let us know which gauges/digital dashboard display (Racepak etc) you’d like (along with their dimensions and the approximate location that you’d like them) to go on the dashboard in front of the driver. Your custom setup must fit within the following dimensional area: 14.5″ wide x 4.75″ high

-Stock Radio Notes: This option allows you to utilize the OEM radio. Please note that there are two cover plates (included) that are needed for mounting as shown in the photos.

-Defroster vents are standard for all dashboard configurations

-Our dashboard will fit the stock gauge cluster or our aluminum gauge panel (our aluminum panel is included if you choose “Customized” for the Driver’s Gauges Option). We cannot guarantee if it will fit with other aftermarket gauge clusters.

-Here are a list of the options that correlate to the numbered CAD drawing of the dashboard. Please reference these numbers in the customization field if you’d like anything omitted: Air Conditioning Vents & Climate Control (3), Headlight Switch (4), Overdrive/Fog Light/Cubby (5), Cup Holder (6), 12V Sockets/Cigarette Lighters (7), Ash Tray (8)

-Our dashboard kit ships unassembled and will need to be riveted together! All rivets are included and all holes are pre-cut in the proper locations, so assembly is straightforward and there are thorough installation instructions. Assembly and installation will take between 10 and 20 hours depending on your mechanical skill level (this time includes complete removal and disassembly of the stock dash to accept our aluminum dashboard).

-The dashboard was extensively tested in our Dodge Ram (1995 Cummins diesel 3500 dually 2WD with a 5 speed) to ensure that there were no rattles. We also swapped in an automatic steering column to verify that there was no interference with the column shifter. Once the dash is fully installed, it is very sturdy and rigid. 

-The top cap (over the gauge hood) is removable for easy access to wiring and removal of any switches or components that mount to the gauge bezel.

-None of the stock components are included. They are shown for reference only!

-All powder coated pictures are for reference only and coating colors and textures might vary slightly with different batches. We tried to match the stock gray and tan as closely as possible, but it will likely not be exact.

-Textured Matte Light Gray powder coat note: The gauge bezel and both of the RH side storage cubbies will be powder coated black (see reference photos).

-Powder Coating will add approximately 3 weeks to our standard build time.

-Due to the customizable nature of the dashboard, it is not eligible for return or exchange!

*For track of offroad use ONLY! We cannot be held liable for any damage, injury, etc. from improper usage.*

-If you would like a phone call to discuss options or if you have any questions, we’d be happy to set that up! Please fill out our General Inquiry contact form here: https://lrbspeed.com/contact-us/

 

*All products are made to order in house by Landon and Rebecca, so we currently have a 15 business day (3 week) build time. Thanks for understanding! 🙂 *