FC Aluminum Louvers

$350$450

Clear

Finish

Click here if you’d like your louvers to be powder coated in matte black! (Please note, this increases the build time from 10 to 20 business days!)

SKU: N/A Categories: ,

Description

This is the moment we’ve been waiting for.. Countless hours of development time getting these perfect has finally paid off! Introducing our new aluminum louvers for the 2nd generation RX7 🙂

CNC Plasma cut from 0.063″ aluminum, with all necessary mounting hardware and very detailed installation instructions included. Depending on your budget/fabrication level, we have a few different tiers from you to choose from. All tiers come with the same parts, they are just divided into different levels reflecting how much assembly is required (the cheaper the tier, the more assembly work you will do). Please read the following tiers carefully and choose what will work best for you!

Tier 1 ($350): This is the lowest priced set, for someone who is pretty experienced with fabrication/assembly. You’ll need to be able to drill, bend, and rivet the pieces together yourself with this kit. If you’ve got the tools and know-how this will save you some money!

The top side pieces will come bent by us using a slip roll so we can ensure that the bend for the shape of the louvers will be correct. All of the pieces come with pilot holes, but they will need to be drilled out (drill bit is included in the kit) to ensure proper fitment with the rivets, the main stepped slats will need to be bent by you on a bench vise using the sheet metal clamps, all of the slats will need the sides bent, and then the whole kit will need to be bolted/riveted together and mounted to the car.

Tools Needed:

  • Bench Vise
  • Good pair of sheet metal clamps (Harbor Freight Item Number 30024 or something similar will work!)
  • Drill
  • Riveter (Hand or Pneumatic will work)
  • 10mm Socket with Extensions
  • Linesman Pliers (or similar)
  • Metric Allen Key Set

Tier 2 ($375): This kit is a step above the first in cost, but there will be a little less assembly required. All holes will be pre-drilled by us, so you’ll need to bend, rivet, and bolt your louvers together.

The top side pieces will come bent by us using a slip roll so we can ensure that the bend for the shape of the louvers will be correct. All holes will be pre-drilled for you, the main stepped slats will need to be bent by you on a bench vise using the sheet metal clamps, all of the slats will need the sides bent, and then the whole kit will need to be bolted/riveted together and mounted to the car.

Tools Needed:

  • Bench Vise
  • Good pair of sheet metal clamps (Harbor Freight Item Number 30024 or something similar will work!)
  • Riveter (Hand or Pneumatic will work)
  • 10mm Socket with Extensions
  • Linesman Pliers (or similar)
  • Metric Allen Key Set

Tier 3 ($450): This is our most complete kit with the easiest installation.

The top side pieces will come bent by us using a slip roll so we can ensure that the bend for the shape of the louvers will be correct. Everything will be pre-drilled, and the stepped pieces will be pre-bent. The sides of each slat will still require bending, but it is very simple by hand and doesn’t have to be super precise. The last step will be for you to bolt/rivet the kit together and mount to the car!

Tools Needed:

  • Riveter (Hand or Pneumatic will work)
  • 10mm Socket with Extensions
  • Linesman Pliers (or similar)
  • Metric Allen Key Set

**Please make sure that you choose the appropriate tier for your skill level. Bends must be crisp and sharp or the slats won’t fit together flush. It’s a lengthy and somewhat tedious process, hence the added cost for the less DIY tiers. We are offering the different tiers to try to pass the savings on to you, but please take your time and closely follow directions during assembly as we cannot afford to send out free replacement parts. If you do run into any snags, just contact us and we’ll be happy to work with you!

All louver kits come standard in raw aluminum with a rotary sanded finish. Powder coating can be added to any of the 3 tiers for an additional $180!

***DUE TO THE COMPLEXITY OF THESE LOUVERS THERE WILL BE A 20 BUSINESS DAY BUILD TIME FOR RAW ALUMINUM LOUVERS, AND A 30 BUSINESS DAY BUILD TIME FOR POWDER COATED LOUVERS!***

If we are able to ship them out ahead of schedule we definitely will, as we don’t want you waiting any longer than necessary. Please keep in mind that LRB Speed is a husband and wife team who will be working as quickly as humanly possible, so please have patience! 🙂

Additional information

Weight N/A
Dimensions N/A